Camera Settings
Describes the camera calibration and registration of new robobrain.eye cameras.
Last updated
Describes the camera calibration and registration of new robobrain.eye cameras.
Last updated
The camera can be edited in the "cameras" section. In this area, additional cameras can be added and calibrated accordingly.
Option - System - Cameras
All registered cameras are displayed in the camera overview. These can be edited further at this point. Each individual camera must be calibrated individually. This can be done via the "calibrate" button. The description of the calibration can be found in the section "Hand-Eye-Calibration".
In this overview, the important statuses of the camera are also displayed in order to quickly identify which camera is the "default" camera and whether the respective camera is calibrated.
In the editing area, all settings of the camera can be viewed. At this point, the user can customize the name of the camera.
If a camera is registered, the default flag must be set so that the robot knows which camera to communicate with.
In case of two cameras, one of them should always be defined as default.
New robobrain.eye cameras can be added. For this, the identifier and an update of the robobrain® is necessary. After filling in the name and the identifier, it must be confirmed with the button "Register". If you need more of this option please contact our sales team.
During the registration process, the corresponding camera must be connected to the robobrain®.
